PAE, Inc CBP Aircraft Mechanic Laredo in Laredo, Texas
Supporting the Most Exciting and Meaningful Missions in the World
CBP Aircraft Mechanic Laredo
This candidate is responsible for overseeing and performing scheduled and unscheduled aircraft maintenance; inspections and corrosion control of aircraft components, airframe and power plant; maintain appropriate aircraft records and logs.
Candidate will report to the Maintenance Manager and or Site Manager
Must be customer oriented.
Performs scheduled and unscheduled aircraft maintenance.
Review work of subordinates to ensure the function/task is correct and complete and takes corrective action and/or training if necessary.
Addresses employee questions and concerns presented within the work crew. If questions and concerns are not resolved, ensures that employee concerned is given the opportunity to seek further assistance through the Maintenance Manager/Supervisor,
Perform daily/post flight/thru flight inspections as required and performs necessary maintenance to correct any malfunctions.
Conduct off station maintenance when required.
Effectively communicate with the customer in a courteous, professional manner and research any reported aircraft discrepancies through fault isolation to make repairs.
Service aircraft with fuel, oil, etc. in preparation for flight.
Maintain aircraft log books, status reports, historical and administrative data as required.
Comply with applicable Government and FAA rules and regulations on maintenance and follow appropriate aircraft technical data.
May be required to function as Safety/Training/Supply point of contact in the FBO concept at AOS-U or AOS-A site’s.
May be required to exercise independent judgment and travel or relocate to other geographical locations including foreign countries.
May be required to have a security clearance and passport in the performance of duties.
Must be a US citizen and completed high school or equivalent.
Must read, write, speak, and understand English.
Aircraft Mechanic to perform scheduled and unscheduled aircraft maintenance on multiple types of aircraft with AS350, C-206, UH-1 experience preferred.
Must have Three (3) years recent experience working full time as an aircraft mechanic or (5) years of On Job Training.
Have a current FAA Airframe and Power plant Certificate.
A thorough working knowledge in the repair and maintenance of airframes, hydraulics, fuel systems and aircraft engines.
Must be able to obtain a passport, visa and pass an extensive government back ground investigation, to support operations in foreign countries and deployments.
Must be able to work well with others or independently, predicated on the scope and depth of operations at specified sites.
Ability to physically perform climbing, stooping, stretching, etc. operations related to the job and lift up to 50 pounds.
Analytical abilities sufficient to handle complex technical and administrative details.
Must have the ability to communicate effectively and deal courteously and professionally with the customer.
Must have an airframe and powerplant (A&P) license.
Must be able to obtain a clearance through Custom Border Protection.
CBP Avionics Technician and Electronics Tech II have the same Job Desc
BASIC FUNCTION SUMMARY
· Performs maintenance on aircraft electrical and electronics systems, instruments, auto‑pilots and Navigation Systems as required.
· Responsible for overseeing and performing scheduled and unscheduled aircraft maintenance; inspections and corrosion control of aircraft components, airframe and powerplant; and maintain appropriate aircraft records and logs.
· Reports to the Maintenance Manager. Site Supervisor and or the Site Manager.
· Must be customer oriented.
ESSENTIAL DUTIES AND ACCOUNTABILITIES
· Troubleshoot all avionics systems, conducting fault isolation and repair of faulty components.
· Build up and replace faulty wire harness/bundles as needed.
· Test avionics systems periodically as required for preventative maintenance.
· Install/modify Government furnished Classified Communications Equipment according to applicable Technical Directives, industry standards and FAA regulations.
· Produce new and modify existing wiring diagrams according to applicable technical data/documents and FAA regulations.
· Perform corrosion control inspections on aircraft avionics components and take corrective actions when necessary.
· Perform quality assurance inspections on avionics equipment and ensure all avionics test equipment and special tools are calibrated on schedule and prior to usage.
· Coordinate with the appropriate supply personnel to ensure that an adequate inventory of electronic and electrical components are available.
· Conduct off-station maintenance when required.
· Effectively communicate with the customer in a courteous, professional manner and research any reported aircraft discrepancies through fault isolation to make repairs.
· Wash, clean and maintain the interior and exterior of the aircraft to company standards.
· Support the Tool and FOD Programs by maintaining a clean work areas and following procedures.
· Maintain aircraft log books, status reports, historical and administrative data as required.
· Follow manufacture’s, government, DoD and FAA technical data required to appropriately maintain CBP aircraft in accordance with the required regulations and airworthiness standards.
· Operate or maintain Ground Support Equipment, vehicles or equipment as required.
· May be required to exercise independent judgment and travel or relocate to other geographical locations including foreign countries on temporary duty.
· Minimum of five (5) years recent experience working full-time as an Avionics Technician.
· A FCC General license is preferred.
· A current FAA Airframe and Powerplant certificate is preferred.
· A thorough working knowledge of both military and general aviation electrical and electronic systems, and components and pitot static systems.
· Experience in repair/maintenance/installation of intercommunications, ADF, LF, VHF, HF, and UHF communications, navigations systems, instrument landing systems, auto pilots and associated aircraft lighting systems.
· Must be able to read, write, speak and understand English.
· The mental and visual ability to read, understand and interpret detailed technical publications and instructions.
· Must be a US citizen and completed high school or equivalent.
· Must have the ability to deal courteously, professionally, and effectively with the customer.
· Must be able to obtain a passport, visa and Government security clearance and travel to support field operations.
· Must be able to work well with others or independently, predicated on the scope and depth of operations at specified sites
· Analytical abilities sufficient to handle complex technical and administrative details.
· May require an FAA Form 8060‑1 Repairman Certification within 90 days of assignment to this position.
PHYSICAL DEMANDS AND ENVIRONMENTAL CONDITIONS
This classification activity is usually accomplished in a office/hangar/flight line environment and as such requires the scope of physical movements and postures normally associated with office/hangar/flight line activities. May be required to lift objects whose weight normally will not exceed 50 pounds. Special vision abilities required to perform this job are close vision, color vision, peripheral vision, depth perception and the ability to adjust and focus.
The diversity of work conditions may range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject individual to severe changes of temperature, wind, rain, etc. May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles.
LICENSING, CERTIFICATION REQUIREMENTS
· Security Clearance*
· Hazardous Communication / MSDS
· CPR/Bloodborne Pathogen
· Driver License
· Support Equipment License
· Hazardous Material Handling
· Corrosion Control
· Aircraft Ground Handling
· Tool Inventory
· Foreign Object Damage (FOD) Prevention
· Electro Static Discharge
· Run-Up and Taxi*
· Portable Fire Extinguishers
An Equal Opportunity Employer. PAE’s hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.
EEO is the Law Poster at http://www1.eeoc.gov/employers/upload/eeocselfprint_poster.pdf
JOIN OUR TALENT NETWORK at http://www.jobs.net/jobs/pae/join
PAE is a leading provider of enduring support for the essential missions of the U.S. government, its allied partners and international organizations. With over 60 years of experience, PAE supports the execution of complex and critical missions by providing global logistics and stability operations, technical services and national security solutions to customers around the world. PAE has a workforce of approximately 15,000 people in over 60 countries on all seven continents and is headquartered in Arlington, VA.
In compliance with the ADA Amendments Act (ADAAA), should you have a disability and would like to request an accommodation in order to apply for a currently open position with PAE, please call Recruiting at (703) 656-6064 or email email@example.com with "Disability Assistance" in the subject line.